Difference between revisions of "XRGB-1"
(→Capacitor List) |
(→Capacitor List) |
||
| Line 41: | Line 41: | ||
== Capacitor List == | == Capacitor List == | ||
| − | + | {| class="wikitable" style="text-align:left; width:20%;" | |
| − | + | |- | |
| − | SMD:<br> | + | ! scope=col | Ver 1.1 PCB |
| + | ! scope=col | Ver 2.2 PCB | ||
| + | |- | ||
| + | |SMD:<br> | ||
C1 100uF/16V<br> | C1 100uF/16V<br> | ||
C3 100uF/16V<br> | C3 100uF/16V<br> | ||
| Line 80: | Line 83: | ||
C72 470uF/16V<br> | C72 470uF/16V<br> | ||
C43 470uF/16V<br> | C43 470uF/16V<br> | ||
| − | + | C67 100uF/10V<br> | |
C69 100uF/10V<br> | C69 100uF/10V<br> | ||
C71 100uF/10V<br> | C71 100uF/10V<br> | ||
C56 22uF/16V<br> | C56 22uF/16V<br> | ||
| − | + | |HOLE: | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | HOLE: | ||
C43 470uF/16V<br> | C43 470uF/16V<br> | ||
C70 470uF/16V<br> | C70 470uF/16V<br> | ||
| Line 131: | Line 127: | ||
C9 47uF/16V<br> | C9 47uF/16V<br> | ||
C56 22uF/16V<br> | C56 22uF/16V<br> | ||
| + | |} | ||
| + | |||
| + | Note! the bigger 100uF are the ones that leak first (V1.1 C97,54) | ||
== External links == | == External links == | ||
Revision as of 18:55, 6 August 2018
The first device in the line of XRGB upscan converters. It has four dip switches for changing configurations, and potentiometers to adjust colors and brightness.
Dip switches
| Values | Description |
|---|---|
| 15 kHz / 31 kHz | Adjust output scan rate |
| NTSC / PCB | 75 ohm / 220 ohm setting |
| FM Towns /Normal | Special setting for FM towns computer |
| Normal / Narrow | Control aspect ratio (*) |
(*) note that only V2.2 PCB has DIP switch for Normal / Narrow, the V1.1 PCB only has three DIP switches.
Specifications
Inputs
Outputs
- RGB in 15-pin D-sub (for older Japanese monitors, can be connected to VGA via special cable)
- RCA stereo out
Capacitor List
| Ver 1.1 PCB | Ver 2.2 PCB |
|---|---|
| SMD: C1 100uF/16V HOLE: |
HOLE:
C43 470uF/16V |
Note! the bigger 100uF are the ones that leak first (V1.1 C97,54)