Difference between revisions of "XRGB-1"
Jump to navigation
Jump to search
m |
(→Dip switches) |
||
| Line 18: | Line 18: | ||
|- | |- | ||
|Normal / Narrow | |Normal / Narrow | ||
| − | |Control aspect ratio | + | |Control aspect ratio (*) |
|} | |} | ||
| + | |||
| + | (*) note that only V2.2 PCB has DIP switch for Normal / Narrow, the V1.1 PCB only has three DIP switches. | ||
== Specifications == | == Specifications == | ||
Revision as of 12:57, 6 August 2018
The first device in the line of XRGB upscan converters. It has four dip switches for changing configurations, and potentiometers to adjust colors and brightness.
Dip switches
| Values | Description |
|---|---|
| 15 kHz / 31 kHz | Adjust output scan rate |
| NTSC / PCB | 75 ohm / 220 ohm setting |
| FM Towns /Normal | Special setting for FM towns computer |
| Normal / Narrow | Control aspect ratio (*) |
(*) note that only V2.2 PCB has DIP switch for Normal / Narrow, the V1.1 PCB only has three DIP switches.
Specifications
Inputs
Outputs
- RGB in 15-pin D-sub (for older Japanese monitors, can be connected to VGA via special cable)
- RCA stereo out